Pictures or shafts and parts

Any questions pertaining to driveshafts, universal joints, rzeppa heads or any part or concern or problems, vibrations. Anything related to the driveshaft

Pictures or shafts and parts

Postby Supershafts » Thu Jul 12, 2012 9:07 pm

Aluminum shaft, this particular shaft is being run in a drag class car but they can be used in many different applications and can increase your performance, acceleration and gas mileage

Image

These are centering stud yokes that have there centering pins wrecked from non service and worse being ignored from the little signs they give letting you know there is a problem, usually starting as a squeak or squeal and then worse a vibration.
This is a costly repair, if you hear a noise stop in and let me check it for you so you don't have this issue

Image

The new stud yoke and flange yoke

Image

Image

Image

Carbon Fiber, 4.125 shaft

Image

Image

Image
Image The 1 and only, don't be fooled and lied to by imitators
Supershafts
Site Admin
 
Posts: 55
Joined: Thu Jul 12, 2012 10:00 am
Location: 194 Morris ave, unit 55 Holtsville, NY, 11742

Re: Pictures or shafts and parts

Postby Supershafts » Sun Apr 21, 2013 2:09 pm

New GKN Stub for a Rzeppa head shaft

Image

New Spicer 1330 series weld yoke

Image

#BMW_X_series (problem)

Image

#BMW X series (solution)

Image

#BMW X series (problem)

Image

#BMW X series solution

Image
Image The 1 and only, don't be fooled and lied to by imitators
Supershafts
Site Admin
 
Posts: 55
Joined: Thu Jul 12, 2012 10:00 am
Location: 194 Morris ave, unit 55 Holtsville, NY, 11742

Re: Pictures of shafts and machined parts we provide

Postby Supershafts » Mon Apr 28, 2014 7:58 am

Dodge front CV shaft, upgraded to 1350 and greasable centerkit and joints thru the cap

Image

When we replace your worn stub, tube yoke we machine the weld off and do not cut your tube removing material from your shaft, eventually over time if enough parts are changed it could cause you to need a new shaft from it becoming to short

Image
Image The 1 and only, don't be fooled and lied to by imitators
Supershafts
Site Admin
 
Posts: 55
Joined: Thu Jul 12, 2012 10:00 am
Location: 194 Morris ave, unit 55 Holtsville, NY, 11742

Re: Pictures or shafts and parts

Postby Supershafts » Sun Jun 28, 2015 8:52 pm

Jeep with new increased angle rear shaft and pinion degree set correctly.

Image

Jeep shaft again with the ultimate SPL series greasable joints

Image
Image The 1 and only, don't be fooled and lied to by imitators
Supershafts
Site Admin
 
Posts: 55
Joined: Thu Jul 12, 2012 10:00 am
Location: 194 Morris ave, unit 55 Holtsville, NY, 11742


Return to Driveshaft section, pictures

Who is online

Users browsing this forum: No registered users and 2 guests

cron